VB00014 - Ventis HEI170 Wood Insert with Blower - Unit by Ventis

VB00014 - Ventis HEI170 Wood Insert with Blower - Unit by Ventis

Ventis HEI170 Wood Burning Fireplace Insert featuring a single cast iron door and a great option for updating old and inefficient fireplace. It is a medium size wood insert suitable for smaller spaces and capable of heating up to 1,800 square feet while producing up to 65,000 BTUs. The firebox can hold up to an 18-Inch log. The clean burning non-catalytic insert is EPA approved with a low 1.26 g/h emissions rating.

Features

• Medium size wood insert suitable for smaller spaces
  
• EPA certified at only 1.26 g/h
  
• Solidity and manufacturing quality
  
• Non-catalytic combustion technology
  
• Installation authorized on the Island of Montreal
  
• Cast iron door
  
• 144 CFM blower
  
• Stainless steel heat shield added to the firestop
  

Required option: 

• Choose one faceplate to complete this unit. Not Included, Sold Separately.
• Regular faceplate (VBA1555) or Large faceplate (VBA1556).
  

Appliance Performance

• Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
• Optimum overall efficiency at a specific burn rate (LHV).
• This appliance is officially tested and certified by an independent agency.
• The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
• As measured per CSA B415.1-10 stack loss method.
• Higher Heating Value of the fuel.
• Lower Heating Value of the fuel.
• The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the solid fuels into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
• Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
• Carbon monoxyde.

General Features

Documents & Downloads

• Download Product Catalogue
• Download Installation and User’s Manual
• Download Safety & General Information
• Download Appliance Dimensions

Related Videos