Sierra Flame - The Abbot 30PG - Direct Vent Gas Insert
The Abbot 30IN Direct Vent Gas Insert
Just like that little black dress that goes with everything, the Abbott’s direct vent gas fireplace insert is understated sophistication with a no fuss contemporary design.
With it’s impressive glass viewing area, the Abbot gas fireplace offers you superior flame and heat control. Each insert comes with the standard black porcelain panels, black reflective glass and a 9 piece rock set. For a more traditional look try the optional ceramic brick panels and log set. The Abbot comes standard to run on natural gas but also available for liquid propane use.
Sierra Flame’s Direct Vent Insert is a true clean face design offering an impressive glass viewing area. The Abbot is available in Deluxe and Premiere systems and comes standard with contemporary black porcelain panels, black reflective glass and a 9 piece rock set OR traditional ceramic brick panels and log set.
FEATURES
Premiere System
- True clean face design • Ceramic glass
- 26,000 BTU
- Hi/low modulating flame control
- Electronic ignition
- 100% safety shut off
- On/off thermostat
- Battery powered
Deluxe System
- True clean face design
- Ceramic glass
- 26,000 BTU
- 7 day programmable thermostat remote control
- 7 stage modulating flame control
- Full fan kit w/6 stage adjustable fan control
- 110v required
- Electronic ignition
- 100% safety shut off
INCLUDED ACCESSORIES

OPTIONAL ACCESSORIES
- Chimney cap
- Extra decorative rock media – 3 piece set
SURROUND OPTIONS
- Standard black 3 sided surround ‐ 40″ W x 28″ H
- Standard black 3 sided surround ‐ 40″ W x 26″ H
- 4 sided black surround ‐ 40″ W x 31 1/2″ H
GLASS VIEWING AREA:
18-1/2” H x 62-3/4” W
FUEL OPTIONS
- Natural Gas
- Liquid Propane
GLASS VIEWING AREA:
16” H x 25” W
Spcs
Gas Specifications
Framing Dimensions |
20-1/4” H x 27” W x 16-1/4” D |
Viewing Area |
16” H x 25” W |
BTUs(NG) |
Hi 26,000 Low 10,500 |
AFUE / P.4 (NG Efficiency) |
68.3 % |
Weight* |
115 lbs. |
Venting** |
3” flex vent on exhaust side 3” flex vent on the air intake side |
Ceiling / Mantle Height |
Mantle Height = minimum 33” with a 4” deep mantle Please see manual for other mantle clearances |
**Venting – Any certified 2 ply flex piping can be used. Certified on Duravent, Selkirk, Metal Fab, ICC