Skip to content

VB00015 - Ventis HE250R ZC Wood Fireplace with Blower -Unit by Ventis

by Ventis
Save 13% Save 13%
Original price $4,520.00
Original price $4,520.00 - Original price $4,520.00
Original price $4,520.00
Current price $3,924.00
$3,924.00 - $3,924.00
Current price $3,924.00
+ FREE SHIPPING | No Sales Tax! Exclusions Apply | Found it lower?

VB00015 - Ventis HE250R ZC Wood Fireplace with Blower -Unit by  Ventis

Ventis HE250R is a large classic fireplace with single door that is recommended for heating larger spaces from 750 to 2,200 square feet. The firebox is lined with moulded refractory bricks for better heat distribution. This unit offers non-catalytic combustion technology and a Stainless-steel secondary-air system which improves gas combustion. The HE250R can hold 20-Inch logs, 80,000 BTU/H max, and is EPA 2020 approved. 6-Inch Ventis stainless steel anchor plate & fresh air intake adapter included.

Features

  • Designed mainly for heating
  • Large classic fireplace with single door
  • EPA 2020 certified
  • Non-catalytic combustion technology
  • Installation authorized on the Island of Montreal
  • Firestop made of high density insulation board
  • Ventis distinctive louvers included
  • 176 CFM blower included
  • Molded refractory stones
  • 6" Ventis stainless steel anchor plate included
  • Fresh air intake adapter included

Required Option: 

  • Modern Faceplate (VBA1560).

Appliance Performance

Fuel type Dry cordwood (16" recommended)
Recommended heating area 750 - 2,200 ft²
Overall firebox volume 2.5 ft³
Maximum burn time 8 Hours
EPA loading volume 1.69 ft³
Maximum heat output-dry cordwood 80,000 BTU/h
Minimum overall heat output rate 14,200 BTU/h (4.16 kW)
Maximum overall heat output rate 48,200 BTU/h (14.13 kW)
Average efficiency-dry cordwood (HHV) 68 %
Average efficiency-dry cordwood (LHV) 73 %
Optimum efficiency 74 %
Optimum heat transfer efficiency 71 %
Average particulate emission rate 1.14 g/h
Average CO 53 g/h
  • Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
  • Optimum overall efficiency at a specific burn rate (LHV).
  • This appliance is officially tested and certified by an independent agency.
  • The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
  • As measured per CSA B415.1-10 stack loss method.
  • Higher Heating Value of the fuel.
  • Lower Heating Value of the fuel.
  • The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the solid fuels into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
  • Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
  • Carbon monoxyde.

General Features

Premium quality blower included (CFM) 176 CFM included
Certified according to applicable standards CAN/USA accredited laboratory
Flue outlet diameter 6"
Recommended chimney diameter 6"
Type of chimney CAN/ULC S629, UL 103 HT (2100 °F)
Minimum chimney height 15"
Overall dimension (Width) 36 3/4"
Overall dimension (Height) 37 1/4"
Overall dimension (Depth) 28 5/8"
Door type Single, glass with cast iron frame
Door opening size (Width) 25 3/8"
Door opening size (Height) 10 9/16"
Glass type Ceramic glass
Glass surface - W x H 24" x 10 5/8"
Firebox size (Width) 20 3/8"
Firebox size (Height) 12 1/8"
Firebox size (Depth) 13"
Maximum log length 20"
Log positioning Loading over width
High-efficiency certified appliance Yes, EPA 2020 approved
Canadian Standard (safety) ULC S610
USA Standard (safety) UL 127
Combustion technology Non-catalytic
Baffle type High density insulation board
Stainless-steel secondary-air system Yes
USA Standard (emissions) EPA
Canadian Standard (emissions) CSA B415.1-10
Shipping weight 495 lb (225 kg)

Documents & Downloads

Related Videos